-The DST-33 is designed to securely support a new generation of light-weight DV and HD TV cameras
-All-metal fluid head for smooth camera movements and lasting durability
-Long, metal quick release plate allows perfect balancing of a camera with accessories attached
-60mm ball leveler and speed release leg locks for fast set-up and pack-up of tripod
-Excellent for "run-and-gun" video with compact cameras
-Expandable mid-level spreader included for increased stability
-Dual rail upper stage legs to prevent tripod flex when panning
Model No.
DST-33
Max. Height
59.65 in. (1515mm)
Min. Height
26.57 in. (675mm)
Weight
6.97 lbs. (2.85kgs)
Capacity
8 lbs. (3.6kgs) ideal load range 5~10 lbs.
Leg Sections
Three (3) dual rail upper section
Ball Base
2.36 in. (60mm)
Leg Lock Type:
Speed release leg locks
Folded Length:
-
DST-32
-The DST-32 is designed to securely support a new generation of light-weight DV and HD TV cameras
-All-metal fluid head for smooth camera movements and lasting durability
-Long, metal quick release plate allows perfect balancing of a camera with accessories attached
-60mm ball leveler and speed release leg locks for fast set-up and pack-up of tripod
-Excellent for "run-and-gun" video with compact cameras
-Expandable mid-level spreader included for increased stability
-Dual rail upper stage legs to prevent tripod flex when panning
Model No.
DST-32
Max. Height
61.6 in. (1565mm)
Min. Height
36.6 in. (930mm)
Weight
7.05 lbs. (3.2kgs)
Capacity
12 lbs. (5.44kgs) ideal load range 5~10 lbs.
Leg Sections
Two (2) dual rail upper section
Ball Base
2.36 in. (60mm)
Leg Lock Type:
Speed release leg locks
Folded Length:
-
DST-3
- High-stress components manufactured from die-cast aluminum
- Multi-angle leg locks for very low angle positioning
- Excellent for light-weight Mini DV cameras and consumer camcorders
- All-metal head and quick release platform, separate tilt and pan locks and sliding camera post
- Tilt range from +52° to -90°
- 60mm ball leveler
Model No.
DST-3
Max. Height
57.28 in. (1455mm)
Min. Height
11.5 inches (292mm)
Weight
6.11 lbs. (2.77kgs)
Capacity
6.6 lbs. (3.0kgs)
Leg Sections
Three (3)
Ball Base
2.36 in. (60mm)
Folded Length:
-
DST-1
- Multi-angle leg locks for very low angle positioning
- Excellent performance with cameras weighing 6.5 lbs.
or less which use a 1/4” cameras mount screw and video pin.
- Spring loaded Fluid head for smooth movements
- 60mm ball leveler
- Short folded length gives good for travel
Model No.
DST-1
Max. Height
51.18 in. (1300mm)
Min. Height
26.57 in. (675mm)
Weight
4.32 lbs. (1.96kgs)
Capacity
6.6 lbs. (3.0kgs)
Leg Sections
Three (3)
Ball Base
2.36 in. (60mm)
Folded Length:
-
504 QF II
The SLIK 504 QF II shares its leg set with the ABLE 300 DX, but it comes complete with a solid SLIK 2-way fluid pan head incorporating an easy to grip pan handle with full angle adjustments. The panhandle is long enough to give excellent leverage for smooth panning. There is a bubble level built into the base of the head so the tripod can be leveled quickly after being set up. The head also has a video quick release plate for fast mounting and un-mounting of the camera.
The legs of the 504 QF II set up and fold down securely, just loosen and tighten leg lock knob to extend or shorten them. 3 position leg locks make for easy set up on uneven ground or steps. These leg locks also allow the height of the tripod to lowered dramatically. Combine this feature with the 504 QF II/300 DX Short Column (optional accessory) and the tripod can be lowered to just 14 inches (350 mm) the for very low angle or macro videography in the field.
This lightweight video tripod folds down to just 27 inches, and with a weight of 5.6 lbs it’s an excellent tripod to take on location.
The SLIK U 700 dolly was created so that the tripod could be moved around a studio with ease.
